Filter
Top Products
UBCD396XT
172
52. Tone-Out for...
Tone-Out Standby
Check the tone out channels for paging tones, according to each channel's
individual settings.
Tone-Out Setup
This menu lets you configure the 10 tone-out channels. Select the channel you
want to edit from the list, then set the frequency, tone, and other options for that
channel.
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECTVOLUME-SQUELCH knob on the handheld scanners to choose the
character you want, then press 6 (right cursor) to move the cursor to the next
character.
Set Frequencies
Use this menu to program frequencies for this Tone Out channel.
Set Tone
This menu lets you configure the type of tone out search. Select the tone you want
to edit (Edit Tone A or Edit Tone B ), then set the frequency for that tone. Enter a
frequency between 250 Hz and 3500 Hz, or set the frequency to 0 Hz. (See Tone A
and Tone B Settings for more information.)
Set Delay Time
Set the number of seconds the scanner should wait after a transmission stops
before moving on to the next channel. Select 0, 1, 2 (default), 5, 10, or 30 seconds .
To have the scanner wait for your input before moving on to the next channel,
select Infinite .
Set Alert