Filter
Top Products
UBCD396XT
179
Set C-CH Output
Choose how you want the scanner to handle control channel data:
Off : The scanner will not output the control channel data.
On : The scanner will output the control channel data.
Extend : The scanner will output the control channel data along with any
description.
Set GPS Format
Configure how the scanner displays position coordinates, time, and units during
GPS operation:
Set Pos Format
Select how the scanner displays longitude and latitude:
DMS: DDD° MM' SS.ss : Display coordinates in degrees (DDD), minutes
(MM), and seconds (SS.ss).
DEG: DDD.dddddd : Display coordinates as decimal degrees.
Set Time Format
Select 12H for 12-hour (am/pm) time format or 24H for 24-hour time format.
Set Time Zone
Set the number of hours your local time zone differs from universal time
(GMT/UTC). Select from -14 hours to +14 hours in half-hour (0.5 h) increments.
Set Unit
Select the unit used for distance: mile or kilometer (km).
Set Serial Port
Set the baud rate for the scanner's serial port. Choose from 4800, 9600, 19200,
38400,57600 , or 115200 bps; select Off to disable the serial port.