Filter
Top Products
UBCD396XT
182
55. Wired Clone
This feature allows you to copy all the settings from one scanner to another of the
same model:
Use the included data transfer cables to connect the two scanners. Plug each
of the cables DB9 connector into one side of a Gender Changer/Null-
Modem Adaptor.
On the scanner you want to copy from, go to the Wired Clone menu and
select Master.
On the scanner you want to copy to, go to the Wired Clone menu and select
Slave.
The master scanner checks to make sure the slave is properly connected and ready
to receive, then begins the data transfer. Do not disconnect the data transfer
cable or turn off either scanner during the transfer.
When the transfer is finished, both scanners display a Complete message. Reboot
the slave scanner to load the new settings.
All settings and data saved on the Slave scanner will be erased!