Filter
Top Products
UBCD396XT
30
Attenuator Set Attenuator
Hold time Set Hold Time
Location information Set Location Info
Lockout Set Lockout
Modulation Set Modulation
Startup key Set Startup Key
Available operations
Delete a site Delete Site
Create at least 1 frequency in each site
Each trunked system can contain up to 30 frequencies in each site, and all sites
must contain at least 1 frequency.
1. On the Edit Site menu, select the site you just created.
2. Go to the Set Frequencies sub-menu and select New Frequency.
3. Enter at least 1 frequency for this site.
4. When you enter a new frequency, the scanner will prompt you for the logical
channel number or LCN for that frequency. Enter a number from 1 through
30.
5. If you need to change any of the frequency properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set
Frequencies sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property Option name
Required
Logical channel number Input LCN
Recommended
None
Optional
Lockout Set Lockout
Available operations
Delete a frequency Delete Frequency