Filter
Top Products
UBCD396XT
24
10. EDACS SCAT Systems
Please note that these pages are meant as general instructions. While most of the
information here applies to all scanners, some options may not be available on
certain scanner models. Model-specific options are indicated in the text.
Programming an EDACS SCAT System
To program an EDACS SCAT system, you'll need to program the required
elements in following order:
Create a system
1. Go to the Program System menu and choose New System.
2. The scanner will prompt you for the System Type. Select EDCS.
3. The scanner will prompt you for the sub-type. Select SCAT.
4. When the scanner prompts you confirm, tap YES.
5. The scanner creates the system with a default name. Select Edit Name if you
want to change it.
6. If you need to change any of the system properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If
necessary, the sub-menu and option name on each scanner are listed beside the
property.
Property Option name
Required
None
Recommended
Name Edit Name
Number tag Set Number Tag
Optional
Automatic Gain Control
(AGC)
Set Audio AGC
Delay time Set Delay Time
Available operations
Copy a system Copy System
Delete a system Delete System