Filter
Top Products
UBCD396XT
158
When searching in a band that has a mix of analog and digital signals (i.e., where
the Audio Mode is set to All), it is possible to have false decode problems that
results in digital noise at the beginning of transmissions. To prevent this, a user-
configurable P25 wait time (from 0 to 1000 ms) has been added.
During the wait time, the scanner evaluates the received signal; if it detects P25
data, the scanner opens squelch immediately. If it does not detect any P25 data, the
scanner opens squelch as soon as the wait time expires.
Note: Any analog transmissions on this channel will lose the first part of the
transmission, up to the wait time you set here.
Select the number of milliseconds (after the start of a transmission) the scanner
should wait while checking for P25 data. Choose a number from 0 through 1000
ms in 100 ms increments. The scanner only applies the wait time when Tone/Code
Search in Srch/CloCall Opt is set to Off.
Search with Scan
Custom Search
Start a search of the 10 custom search ranges.
Edit Custom
This menu lets you program the ten custom search ranges. Select the custom search
you want to edit from the list, then set the following options:
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECTVOLUME- SQUELCH knob on the handheld scanners or the
SCROLL / FUNCTION knob on mobile scanners to choose the character you
want, then press 6 (right cursor) to move the cursor to the next character.
Edit Srch Limit
Change the range of frequencies covered by this custom search. The scanner
prompts you to input the lower frequency limit and then the upper frequency limit.