Filter
Top Products
UBCD396XT
152
50 ms / 1319 Hz for 125 ms / Silence for 50 ms / 1568 Hz for 125 ms /
Silence for 175 ms / 1319 Hz for 125 ms / Silence for 50 ms / 1568 Hz for
125 ms
– Alert 2 :
1047 Hz for 200 ms / Silence for 200 ms / 1760 Hz for 250 ms / Silence for
100 ms / 1397 Hz for 250 ms
– Alert 3 :
2093 Hz for 125 ms / Silence for 50 ms / 1976 Hz for 125 ms / Silence for
50 ms / 2093 Hz for 125 ms
– Alert 4 :
1319 Hz for 25 ms / Silence for 50 ms / 1397 Hz for 25 ms / Silence for
50ms / 1175 Hz for 25 ms / Silence for 50 ms / 1319 Hz for 25 ms
– Off (No alert tone sounded).
If you select an alert tone, the scanner prompts you to select the volume level
(Level 1 through Level 15 ) you want to the alert tone to use; leave the volume at
Auto to have the scanner sound the alert tone without changing the volume.
Set Location Info
Enter the latitude and longitude for this location.
Set Range
Enter how far out from this location you want the scanner to alert you. You can
configure the scanner to sound an alert tone and flash a light when you reach the
radius entered here. The scanner treats the number you enter here as miles or
kilometres depending on the value you selected in the Set Unit field in the Set GPS
Format menu (under the main Settings menu). Enter a range from 0.05 through 4.0
mi/km, in 0.05 mi/ km steps.
Set Lockout
Decide whether you want to lock out this location so the scanner no longer checks
it.