Filter
Top Products
UBCD396XT
38
Create at least 1 frequency in each site
Each LTR system can contain up to 20 frequencies in each site, and all sites must
contain at least 1 frequency.
1. On the Edit Site menu, select the site you just created.
2. Go to the Set Frequencies sub-menu and select New Frequency.
3. Enter at least 1 frequency for this site.
4. When you enter a new frequency, the scanner will prompt you for the logical
channel number or LCN for that frequency. Enter a number from 1 through
20.
5. If you need to change any of the frequency properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set
Frequencies sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property Option name
Required
Logical channel number Input LCN
Recommended
None
Optional
Lockout Set Lockout
Available operations
Delete a frequency Delete Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no
problems. However, if you want to Scan the system, you'll need to program the
required elements in following order.