Filter
Top Products
UBCD396XT
55
2. Go to the Set Frequencies sub-menu and select New Frequency.
3. Enter at least 1 frequency for this site.
4. If you need to change any of the frequency properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set
Frequencies sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property Option Name
Required
None
Recommended
None
Optional
Lockout Set Lockout
Available operations
Delete a frequency Delete Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no
problems. However, if you want to Scan the system, you'll need to program the
required elements in following order.
Create a channel group
Each P25 system can contain up to 20 channel groups.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that
now. Unless a property is Required , you can operate the system without
changing the default settings.
Channel group properties