Filter
Top Products
UBCD396XT
168
2. Select Edit Service, then select the service search range you want to assign
the Startup Key to.
3. Select Search with Scan, then select Set Startup Key.
4. Enter the Startup Key you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign
the Startup Key to.
3. Select Search with Scan, then select Set Startup Key.
4. Enter the Startup Key you want to use for this custom search range.
Using Startup Keys
To activate a Startup Key:
1. Turn the scanner off.
2. Press & hold the number key that corresponds to the Startup Key while you
power the scanner on. (e.g. To activate Startup Key configuration # 2, press
& hold 2 on the number pad while turning the scanner on.)
3. Continue holding the number key until the scanner display shows the
number of the Startup Key configuration (In the example above, the display
shows Startup Config. Key No. 2 ).
For example, say you have 4 systems programmed according to the table below:
Assigned Startup
Key
State
3 Locked
None (.) Unlocked
None (.) Locked
9 Unlocked
Here is the result if you power on the scanner while you press and hold 3 :
Assigned Startup
Key
Previous state Resulting state
3 Locked Unlocked
None (.) Unlocked Unlocked (no change)