Filter
Top Products
AUTODOME IP Cameras AUTODOME HD Cameras
H.264 BP+ bit-rate-limited
Select this setting when using hardware
decoders. The bit rate is limited to 1.2 Mbps.
CABAC: off
CAVLC: on
GOP structure: IP
I-frame distance: 15
HD stream options:
H.264 MP 720p30 Fixed
H.264 MP 1080p Fixed
H.264 MP 720p60 Fixed*
* In order to select this option here, you must
set the Max. frame rate field in the Advanced
Mode: Camera >Installer Menu to ”H.264 MP
720p50/60 Fixed” first.
H.264 MP SD
Select this setting when using software
decoders, PTZ and for rapid movements in
the images.
CABAC: on
CAVLC: off
GOP structure: IP
I-frame distance: 30
Deblocking filter: on
SD stream options
(Use these options if a second H.264 stream
is allowed):
– H.264 BP+ bit-rate-limited
Select this setting when using hardware
decoders. The bit rate is limited to 1.2
Mbps.
CABAC: off
CAVLC: on
GOP structure: IP
I-frame distance: 15
Deblocking filter: on
– H.264 MP SD
Select this setting when using software
decoders, PTZ and for rapid movements
in the images.
CABAC: on
CAVLC: off
GOP structure: IP
I-frame distance: 30
Deblocking filter: on
To select the stream options:
1. Select the required encoder properties and one of the encoder profiles for each data
stream.
2. Click the Preview button. The preview screens for both data streams are shown.
3. Click the 1:1 Live View button below the preview screen to open a new window with the
original data stream and to check the image quality and the transmission rate.
Property
Select one of the H.264 standards for each stream.
Default profile
Select one of the following profiles for each stream:
AUTODOME IP Profiles
AUTODOME HD Profiles
High resolution 1 HD high quality / low latency
High resolution 2 HD high quality
Low bandwidth HD low bandwidth
100 en | Configuration via IP, Advanced Mode AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems