Filter
Top Products
1. Click the icon again to stop recording.
2. To change the storage location for the recorded video, navigate to the LIVEPAGE settings
on the SETTINGS page.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Basic Mode: Network, page 85).
Processor Load
If the camera is accessed via the Web browser, you will see the processor load indicator in the
top left of the window next to the manufacturer's logo.
You can obtain additional information to help when you troubleshoot or fine-tune the unit. The
values indicate the proportions of the individual functions on the encoder load, shown as
percentages.
4 Move the cursor over the graphic indicator. Some additional numerical values are also
displayed.
Accessing Recorded Video from the Recordings Page / PLAYBACK
Click Recordings to access the Recordings page from the LIVEPAGE or SETTINGS page (the
Recordings link is only visible if a storage medium has been selected).
Figure 15.3: Playback page
Selecting Recordings
All saved sequences are displayed in a list. A track number is assigned to each sequence. Start
time and stop time, recording duration, number of alarms, and recording type are displayed.
AutoDome 7000 Series (IP and HD) Operation | en 145
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679