Bosch Appliances 7000 Security Camera User Manual


 
Table of contents
1
Safety EN 6
1.1 About this Manual 6
1.2 Legal Information 6
1.3 Safety Precautions 6
1.4 Important Safety Instructions 6
1.5 Important Notices 8
1.6 Connection in Applications 11
1.7 Customer Support and Service 11
2
Unpacking 13
2.1 Parts List, Installation 13
2.2 Tools Required 14
2.3 Additional Products Required 16
3
System overview 17
4
Pre-installation Checklist 18
4.1 Stabilization 19
5
Installing the Optional SD Card 20
6
Mount Power Supply Box (Wall, Mast (Pole), and Corner Mounts) 22
7
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 24
7.1 Description 24
7.2 Route Wires and Attach Connectors 24
7.3 Route Power through Intermediate Power Supply Box 28
7.4 Attach Pendant Arm to Power Supply Box 31
7.5 Make Connections in the Power Supply Box 32
7.6 Installing the VGA-PEND-WPLATE 33
7.7 Attach Pendant to Arm and Tighten 37
8
Installing the Roof Parapet and Pipe Mounts 40
8.1 Description 40
8.2 Route Wires and Attach Connectors 40
8.3 Attach Cover Door to Power Supply Box 46
8.4 Installing the VGA-ROOF-MOUNT 47
8.5 Installing the VG4-A-9543 Pipe Mount 49
8.6 Wire the Pipe Interface Board 50
8.7 Attach Pendant to Pipe and Tighten 54
8.8 Make Connections in the Power Supply Box 56
9
Installing the In-Ceiling Mount 57
9.1 Description 57
9.2 Dimensions 57
9.3 Prepare Drywall Ceiling for Installation 57
9.4 Prepare Suspension Ceiling for Installation 57
9.5 Wire the Interface Box 59
9.6 Interface Box Connections 61
9.7 Installing the Ceiling (IP54 Housing) Gasket 63
9.8 Attach Housing to the Interface Box 64
9.9 Secure Housing to Ceiling 66
10
Preparing the Bubble 67
11
Connection 70
11.1 Connecting the AUTODOME camera to the PC 70
AutoDome 7000 Series (IP and HD) Table of Contents | en 3
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679