Filter
Top Products
4. Type an optional name for the scene, up to 20 characters long.
5. Click OK to save the scene to the Preposition list.
The asterisk (*) to the left of the scene name indicates the scene is part of the
preposition tour.
6. To delete a scene from the list, select the scene and click the Delete scene (“X”) button.
7. To overwrite an existing scene:
Click the View Control link to access the PTZ controls.
Use the PTZ controls to navigate to the new scene.
Click the scene in the Preposition list you want to overwrite.
Click the Overwrite scene button to apply the new scene to the existing preposition.
To change the name of the scene, double-click the scene in the list. Then, change the
name in the Edit Scene dialog box and click OK.
8. To view a scene in the preview window, select the scene in the list and click the Show
scene button.
9. To view a scene from the LIVEPAGE:
Click a scene number below the PTZ controls on the View Control tab.
Use the keypad and the Show Shot button on the Aux Control tab.
To define a preposition tour:
1. Create the individual scenes.
By default, all scenes in the Preposition list are in the preposition tour.
2. To remove a scene from the tour, select the scene in the list and uncheck the Include in
standard tour box.
3. Select a dwell time from the Standard preposition tour drop-down list.
4. To start the preposition tour:
Return to the LIVEPAGE.
Click the Aux Control tab.
Type 8 in the input box and click the Aux On button.
5. To stop the tour, type 8 and click the Aux Off button.
6. To select the Dwell time for the Standard scene tour, select the appropriate time (default
5 s) from the drop-down list.
Sectors
Sector
The camera’s pan capability is 360° and is divided into 16 equal sectors. This section allows
you to apply a title for each sector and to designate any sectors as a Blanked Sector.
To define a title for sectors:
1. Place the cursor in the input box to the right of the sector number.
2. Type a title for the sector, up to 20 characters long.
3. To blank the sector, click the check box to the right of the sector title.
Miscellaneous
Address
Allows the appropriate dome to be operated via the numerical address in the control system.
Type a number between 0000 and 9999, inclusive, to identify the camera.
Logs
To save the log file information:
1. Click Download to obtain the log information.
2. Click Save.
3. Navigate to the directory in which you want to store the log information.
14.20
14.21
14.22
AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode | en 107
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679