Filter
Top Products
LIVEPAGE Functions
On this page you can adapt the LIVEPAGE functions to your requirements. You can choose
from a variety of different options for displaying information and controls.
1. Check the box for the items that are to be made available on the LIVEPAGE. The selected
items are indicated by a check mark.
2. Check whether the required functions are available on the LIVEPAGE.
Transmit audio
You can only select this option if audio transmission is actually switched on (see Audio, page
108).The audio signals are sent in a separate data stream parallel to the video data, and so
increase the network load. The audio data are encoded according to G.711 and require an
additional bandwidth of approx. 80 kbps per connection in each direction.
Lease time (s)
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned
names. If an alarm is active, the corresponding icon changes color.
Show alarm outputs
Alarm outputs are shown next to the video image as icons, along with their assigned names. If
the alarm output is active, the corresponding icon changes color.
Show event log
The event messages are displayed along with the date and time in a field next to the video
image.
Show system log
The system messages are displayed along with the date and time in a field next to the video
image and provide information about establishing and ending connections, for example.
Allow snapshots
Here you can specify whether the icon for saving individual images (snapshots) should be
displayed below the live image. Individual images can only be saved if this icon is visible.
Allow local recording
Here you can specify whether the icon for saving (recording) video sequences on the local
memory should be displayed below the live image. Video sequences can only be saved if this
icon is visible.
I-frames only stream
Here you can specify whether the LIVEPAGE displays a viewing tab for an I-frame only stream.
Show scene list
Here you can specify whether the View Controls section of the LIVEPAGE displays a drop-
down box with the list of scenes set in Advanced Mode > Camera > Scenes and Tours of the
SETTINGS page.
Show ‘Intelligent Tracking’
Here you can specify whether the LIVEPAGE displays the controls for the Intelligent Tracking
feature.
Show ‘Special Functions’
Here you can specify whether the LIVEPAGE displays the Special Functions section.
Path for JPEG and video files
1. Enter the path for the storage location of individual images and video sequences that you
can save from the LIVEPAGE.
14.8
AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode | en 93
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679