Filter
Top Products
10. To hide all masks from an image view, click the Disable Masks check box.
Note: If you choose to hide all masks, you must enable each individual mask to show the
mask in the scene.
11. To display IVA behind privacy masks, click the IVA behind masks check box.
Camera Settings
Current Mode
Select from the following options:
– Outdoor
– Motion
– Low Light
– Indoor
– Vibrant
The default setting depends on whether the camera is an in-ceiling camera or a pendant
camera.
Users can overwrite settings, in which case the user mode becomes “Custom.”
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
– ATW: allows the camera to continuously adjust color reproduction.
– Indoor: white balance tracking for indoor use.
– Outdoor: white balance tracking for outdoor use.
– AWB Hold: places the ATW on hold and saves the color settings.
– Extended ATW (default): allows the camera to constantly adjust for optimal color
reproduction.
– Manual: Red and Blue gain can be manually set to a desired position.
– Outdoor Auto: Automatically adjusts the white balance to reduce the dark tones at dawn
or dusk.
– Sodium Lamp Auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
– Sodium Lamp: Optimizes the sodium vapor light to restore objects to their original color.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Saturation
The percentage of light or color in the video image (HD only). Values range from 60% to 200%;
the default is 110%.
Color hue
The degree of color in the video image (HD only). Values range from -14° to 14°; the default is
8°.
Gain control
Adjusts the automatic gain control (AGC). Automatically sets the gain to the lowest possible
value needed to maintain a good picture.
– AGC (default): electronically brightens dark scenes, which may cause graininess in low
light scenes.
– Fixed: no enhancement. This setting disables the Max. Gain Level option.
14.15
102 en | Configuration via IP, Advanced Mode AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems