Filter
Top Products
Figure 14.2: Virtual Masks
3. Click Enabled to enable the virtual mask. The rectangle that represents the mask in the
preview window becomes red. The text “Virtual Masks: ENABLED” appears in the View
Control window.
To disable virtual masks:
4 Click the Disable masks checkbox. The text “Virtual Masks: DISABLED” appears in the
View Control window.
Audio Alarm
The camera can create alarms on the basis of audio signals. You can configure signal strengths
and frequency ranges in such a way that false alarms, for example due to machine noise or
background noise, are avoided.
Notice!
First set up normal audio transmission before you configure the audio alarm here (see Audio,
page 108).
Audio alarm
Select On if you want the device to generate audio alarms.
Name
The name makes it easier to identify the alarm in extensive video monitoring systems, for
example with the VIDOS and Bosch Video Management System programs. Enter a unique and
clear name here.
!
Caution!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player programs being unable to play back the
recording.
14.35
AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode | en 125
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679