Filter
Top Products
Min. P-frame QP
This setting allows you to adjust the image quality of the I-frames. The basic setting Auto
automatically adjusts the quality to the settings for the P-frame video quality. Alternately, you
can use the slide control to set a value between 9 and 51. The value 9 represents the best
image quality with, if necessary, a lower frame refresh rate depending on the settings for the
maximum data rate. A value of 51 results in a very high refresh rate and lower image quality.
I/P-frame delta QP
This setting allows you to adjust the maximum image quality of the P-frames. The basic setting
Auto automatically adjusts to the optimum combination of movement and image definition
(focus). Alternately, you can use the slide control to set a value between 9and51. The value 9
represents the best image quality with, if necessary, a lower frame refresh rate depending on
the settings for the maximum data rate. A value of 51 results in a very high refresh rate and
lower image quality.
Values range from -10 to +10; the default is -6.
Background QP
This setting allows you to adjust the maximum image quality of the P-frames. The basic setting
Auto automatically adjusts to the optimum combination of movement and image definition
(focus). Alternately, you can use the slide control to set a value between 9 and 51. The value 9
represents the best image quality with, if necessary, a lower frame refresh rate depending on
the settings for the maximum data rate. A value of 51 results in a very high refresh rate and
lower image quality.
Values range from -51 to +51; the default is 13.
Object QP
This setting allows you to adjust the maximum image quality of the P-frames. The basic setting
Auto automatically adjusts to the optimum combination of movement and image definition
(focus). Alternately, you can use the slide control to set a value between 9 and 51. The value 9
represents the best image quality with, if necessary, a lower frame refresh rate depending on
the settings for the maximum data rate. A value of 51 results in a very high refresh rate and
lower image quality.
Values range from -51 to +51; the default is -12.
Default
Click Default to return the profile to the factory default values.
Encoder Streams
Select the property and Non-recording profile for each H.264 stream and set the parameters
for the M-JPEG stream.
14.13
AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode | en 99
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679