Filter
Top Products
Max Frame Rate Option Available Streaming Options
25/30 ips (up to 1920 x 1080) H.264 MP 720p25/30 Fixed
H.264 MP 1080p25/30 Fixed
50/60 ips (up to 1280 x 720) H.264 MP 720p50/60 Fixed
Notice!
Changing the Base frame rate or Max. frame rate
A change to the Base frame rate or the Max. frame rate parameter requires the AUTODOME
HD camera to reboot. The reboot process takes approximately 10-20 seconds and during this
time no changes can be made. The cameo image freezes.
This section also displays a graphic that shows the relative image size difference between an
image encoded at 1280 x 720 and at 1920 x 1080.
Orientation
Reverses the image 180º (ideal when mounting upside down). Set the orientation to Normal
(default) or Inverted.
!
Caution!
The camera disables the Privacy Mask function if the orientation is set to Inverted.
SC settings
Click the Default button to restore all camera settings to their original defaults.
SC data
Click the Default button to clear all prepositions, privacy masks, and other configuration
settings defined in the AUTODOME 7000 web server to their default values.
Reboot device
Click the Reboot button to reboot the camera. There is a ten (10) second pause before the
dome starts its homing phase. During the homing phase, the camera pans left and right and
tilts up and down. It also adjusts the lens focus. The entire homing phase lasts approximately
40 seconds.
Factory defaults
Click the Defaults button to restore the configuration settings defined in the AUTODOME
7000 web server to their default values. A confirmation screen appears. Allow 5 seconds for
the camera to optimize the picture after a mode reset.
AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode | en 95
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679