Filter
Top Products
1 2
3
4
5
Figure 9.9: In-ceiling (IP54 Rating) Installation Diagram
1
White Trim Ring (factory-installed on
dome bubble)
5 Inner Ring
2 Black Trim Ring (supplied in the
shipping box of the camera)
6 Ceiling (IP54 housing) Gasket
3 Bubble 7 In-ceiling housing
4 Trim Ring Gasket
1. Place the gasket (provided in the shipping box of the camera) over the top of the in-
ceiling housing.
2. Carefully slide the gasket down over the housing, until it rests on the flange of the
housing.
Attach Housing to the Interface Box
The In-Ceiling Housing is attached to the Interface Box and secured by two (2) thumbscrews.
9.8
64 en | Installing the In-Ceiling Mount AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems