Filter
Top Products
Problem Questions to Ask/Actions to Resolve the Problem
Background is too
bright to see subject
– Turn on backlight compensation via the Settings menu (or by using 20 Aux
ON/OFF).
Video is rolling, noisy
or distorted
– Check the frequency.
- From the SETTINGS page, click Advanced Mode.
- Click Camera, and then click Installer Menu.
- In the Base frame rate field, choose either 25 ips or 30 ips.
– Check the integrity of all connectors and splices of the Ethernet cable.
If O.K., then:
– Contact Bosch Technical Support.
Loss of Privacy when
using Privacy Mask
– Webbrowsers, BVC or BVMS
– Press the FindHome key on the Special Functions menu in order to
align the mask back to the original position.
– Intuikey (when keyboard is connected to BVC or BVMS
– Issue a SetScene 110 command in order to align the mask back to the
original position.
No Network
Connection
– Check all network connections.
– Ensure that the maximum distance between any two Ethernet
connections is 100 m (328 ft) or less.
If O.K., then:
– If you are behind a firewall, ensure that the Video Transmission mode is set
to UDP.
– Access the Settings Web page for the IP-enabled device.
– Expand the Service Settings link, then click Network.
– Select UDP from the Video Transmission drop-down list. Then click Set.
154 en | Troubleshooting AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems