Filter
Top Products
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see the AUTODOME 7000 Series online help).
1. If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
2. If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
Audio function
All users who are connected to the AUTODOME camera via Web browser can receive audio
signals from the camera. Audio signals can only be sent to the camera by the user who
connects to the unit first.
1. On the LIVEPAGE, click anywhere next to the video image to remove the focus from the
ActiveX.
2. Hold down the F12 key to establish a voice connection to the camera. The browser’s
status bar displays the message Send Audio ON.
3. Release the F12 key when you want to stop sending audio signals to the camera. The
status bar displays the message Send Audio OFF.
Notice!
When the voice contact connection to the camera is broken, the next user to make a
connection to the camera can send audio data to the camera.
Aux Control Tab
The Aux Control tab is used to enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show
Shot, Set Shot, Aux On, Aux Off). A valid combination either issues a command to the camera
or displays an on-screen menu. (Refer to the User Command Table, page 158 for a list of all
commands.)
Notice!
By default, the camera is configured for a total of 256 presets. You have the option of
disabling the extended presets, and using only 99 presets, although this is not recommended.
To disable extended presets, enter 151 on the keypad, and then click Aux On..
To access the Aux Control tab, navigate to the LIVEPAGE and click the Aux control tab.
142 en | Operation AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems