Filter
Top Products
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative. Refer to
Customer Support and Service, for contact information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
Parts List, Installation
The following table lists the parts included in the shipping box for In-ceiling models of
AUTODOME 7000.
In-ceiling Mount
Quantity Item
1 AUTODOME 7000 In-Ceiling camera with acrylic bubble and white trim ring
1 Interface box
1 Optional black trim ring
1 Ceiling gasket (for IP54 conformance)
1 Product DVD (which includes complete Operation Manual)
1 Packet of printed Safety literature
To mount an In-ceiling mount model of AUTODOME 7000, you must purchase a Bracket
Assembly Support Kit (part number VGA-IC-SP). This Kit is sold separately from the camera.
The following table lists the parts included in the shipping box for pendant models of
AUTODOME 7000.
In-ceiling Mount
Quantity Item
1 AUTODOME 7000 Pendant camera with clear acrylic bubble and sunshield
1 Product DVD (which includes complete Operation Manual)
1 Packet of printed Safety literature
The following table lists the optional parts, sold separately, that you may need for attaching a
Pendant to the Arm Wall, Corner, or Mast mount packages.
Mounting Options
Part Numbers
Pendant Arm (Only) VGA-PEND-ARM
Pendant Arm with Mounting Plate
(24 V VG5 models only, no power supply box)
VGA-PEND-WPLATE
Pendant Arm with one of the following Power Supply Boxes:
– Power Box without transformer (24 VAC) VG4-A-PA0
2
2.1
AutoDome 7000 Series (IP and HD) Unpacking | en 13
Bosch Security Systems Operation Manual 2013.07 | 1.2.2 | F.01U.283.679