Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each camera can have up to 25 Web
browser connections or up to 50 connections via the Bosch Video Management System.
Protected AutoDome
If the camera is password protected against unauthorized access, the Web browser displays a
corresponding message and prompts you to enter the password when you attempt to access
protected areas.
Notice!
An AUTODOME 7000 Series offers the option to limit the extent of access using various
authorization levels (see the AUTODOME 7000 Series online help).
1. Enter the user name and associated password in the corresponding text fields.
2. Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the camera must be configured accordingly, otherwise no communication is
possible.
Image Selection
You can view the image of the camera in different displays.
4 Click one of the tabs Stream 1, Stream 2, or M-JPEG below the video image to toggle
between the different displays of the camera image.
View Control
The View Control tab allows you to control camera functions (pan, tilt, zoom, focus, and iris),
navigate through on-screen menus and to view preset shots.
Ref #
Description Ref # Description
1 Tilts the camera up 8 Focus far
2 Tilts the camera down 9 Focus near
3 Pans the camera to the left 10 Iris close
4 Pans the camera to the right 11 Iris open
5 Pans and tilts the camera in all
directions
12 Sets the pre-set shot for the
corresponding button 1, 2, 3, 4, 5 and 6
6 Zoom out 13 Moves the camera to pre-set shot
numbers 1, 2, 3, 4, 5 and 6
7 Zoom in
140 en | Operation AutoDome 7000 Series (IP and HD)
2013.07 | 1.2.2 | F.01U.283.679 Operation Manual Bosch Security Systems
