Filter
Top Products
114
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Choosing Images Individually
1
Choose [Select].
zFollowing step 2 in “Choosing a Selection
Method” (
=
114), choose [Select] and
press the [ ] button.
2
Choose an image.
zPress the [ ][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [ ] button. [ ] is displayed.
zTo cancel selection, press the [
] button
again. [ ] is no longer displayed.
zRepeat this process to specify other
images.
3
Protect the image.
zPress the [ ] button. A conrmation
message is displayed.
zPress the [
][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.
● You can also select or clear images by touching the screen in
step 2, and you can access the conrmation screen by touching
[
].
● You can also protect images by touching [OK] on the screen in
step 3.
Protecting Images
Still Images
Movies
Protect important images to prevent accidental erasure by the camera
(
=
116).
Choosing a Selection Method
1
Access the setting screen.
zPress the [ ] button and choose
[Protect] on the [ ] tab (
=
30).
2
Choose a selection method.
zChoose a menu item and an option as
desired (
=
30).
zTo return to the menu screen, press the
[
] button.
● Protected images on a memory card will be erased if you format
the card (
=
154,
=
154).
● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.