Filter
Top Products
137
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Connecting to Listed Access Points
1
View the listed access points.
zView the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
(
=
135).
2
Choose an access point.
zPress the [ ][ ] buttons or turn the [ ]
dial to choose a network (access point),
and then press the [ ] button.
3
Enter the access point password.
zPress the [ ] button to access the
keyboard, and then enter the password
(
=
32).
zPress the [
][ ] buttons or turn the [ ]
dial to choose [Next], and then press the
[ ] button.
4
Choose [Auto].
zPress the [ ][ ] buttons or turn the [ ]
dial to choose [Auto], and then press the
[ ] button.
zTo save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
(
=
135).
11
Import images.
zClick [Import Images from Camera], and
then click [Import Untransferred Images].
zImages are now saved to the Pictures
folder on the computer, in separate
folders named by date.
zClick [OK] in the screen that is displayed
after image import is complete. For
instructions on viewing images on a
computer, refer to “Software Instruction
Manual” (
=
163).
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
30) ► [ ] tab ► [Wi-Fi Settings] ► [Target History] ►
[Off].
● A message is displayed if the nickname you enter begins with
a symbol or space. Press the [
] button and enter a different
nickname.
● When the camera is connected to a computer, the camera screen
is blank.
● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
● To disconnect from the camera, turn off the camera.
● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.