Filter
Top Products
143
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
4
Send images.
zTurn the [ ] dial to choose an image to
send, press the [ ][ ] buttons to choose
[Send this image], and then press the [ ]
button.
zPress the [
][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
zImage transfer will begin. The screen
darkens during image transfer.
z[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
zTo cancel the connection, press the
[
] button, choose [OK] on the
conrmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button.
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
30) ► [ ] tab ► [Wi-Fi Settings] ► [Target History] ►
[Off].
● You can also send multiple images at once and change the image
size before sending (
=
144).
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as
follows.
● Only Canon-brand cameras equipped with a Wi-Fi function can be
connected to wirelessly. Even Canon-brand cameras that support Eye-
Fi cards cannot be connected to if they do not have a Wi-Fi function.
You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/
DIGITAL IXUS WIRELESS cameras with this camera.
1
Access the Wi-Fi menu.
zAccess the Wi-Fi menu as described in
step 2 in “Adding a Smartphone Using
the Wi-Fi Menu” (
=
130).
2
Choose [ ].
zPress the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [ ], and then
press the [ ] button.
3
Choose [Add a Device].
zPress the [ ][ ] buttons or turn the [ ]
dial to choose [Add a Device], and then
press the [ ] button.
zFollow steps 1 – 3 on the target camera
too.
zCamera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.