Filter
Top Products
37
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Movies
● Keep your ngers away from the microphone (1) while shooting
movies. Blocking the microphone may prevent audio from being
recorded or may cause the recording to sound mufed.
(
1
)
● Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
● Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (
=
91).
● Audio is recorded in stereo.
● Distorted audio caused by recording when the wind is strong can
be reduced. However, the recording may sound unnatural when
this option is used when there is no wind. When the wind is not
strong, choose MENU (
=
30) ► [ ] tab ► [Wind Filter] ►
[Off].
Still Images
● A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
● If your shots are dark despite the ash ring, move closer to
the subject. For details on the ash range, see “Flash Range”
(
=
196).
● The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
focusing range (shooting range), see “Shooting Range” (
=
196).
● To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
● A blinking [
] icon displayed when you attempt to shoot
indicates that shooting is not possible until the ash has nished
recharging. Shooting can resume as soon as the ash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
● The shutter sound will not be played when the Sleeping and
Babies (Sleeping) icons (
=
38) are displayed.
● Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
● You can change how long images are displayed after shots
(
=
52).