Filter
Top Products
52
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Changing the Image Display Style after Shots
Still Images
Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
zPress the [ ] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
(
=
30).
2
Congure the settings.
zPress the [ ][ ] buttons or turn the
[ ] dial to choose [Display Time]. Press
the [ ][ ] buttons to choose the desired
option.
zTo restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specied time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(
=
30).
Deactivating the AF-Assist Beam
Still Images
Movies
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
zPress the [
] button, choose [AF-
assist Beam] on the [ ] tab, and then
choose [Off] (
=
30).
zTo restore the original setting, repeat this
process but choose [On].
Deactivating the Red-Eye Reduction Lamp
Still Images
Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the ash is used in low-light shots.
1
Access the [Flash Settings] screen.
zPress the [ ] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (
=
30).
2
Congure the setting.
zChoose [Red-Eye Lamp], and then
choose [Off] (
=
30).
zTo restore the original setting, repeat this
process but choose [On].