Filter
Top Products
35
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Shooting Movies
1) Start shooting.
zPress the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
zBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zFrames displayed around any detected
faces indicate that they are in focus.
zOnce recording begins, take your nger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
zTo resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
zWhen you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
3) Finish shooting.
zPress the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zRecording will stop automatically when
the memory card becomes full.
● The ash ring during shots indicates that the camera has
automatically attempted to ensure optimal colors in the main
subject and background (Multi-area White Balance).
(
1
)
4
Shoot.
Shooting Still Images
1) Focus.
zPress the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
zSeveral AF frames are displayed when
multiple areas are in focus.
zIf [Raise the ash] appears on the screen,
move the [
] switch to raise the ash. It
will re when shooting. If you prefer not
to use the ash, push it down with your
nger, into the camera.
2) Shoot.
zPress the shutter button all the way
down.
zAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
zKeep the camera still until the shutter
sound ends.
zAfter displaying your shot, the camera will
revert to the shooting screen.