Filter
Top Products
156
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Setting Copyright Information to Record in Images
To record the author’s name and copyright details in images, set this
information beforehand as follows.
zChoose [Copyright Info], and then press
the [
] button.
zPress the [
][ ] buttons or turn the [ ]
dial to choose [Enter Author’s Name] or
[Enter Copyright Details]. Press the [ ]
button to access the keyboard, and enter
the name (
=
32).
zPress the [
] button. When [Accept
changes?] is displayed, choose [Yes]
(either press the [ ][ ] buttons or turn the
[ ] dial), and then press the [ ] button.
zThe information set here will now be
recorded in images.
● To check the information entered, choose [Display Copyright Info]
on the screen above, and then press the [
] button.
● You can also use the software (
=
163) to enter, change, and delete
copyright information. Some characters entered with the software may
not display on the camera, but will be correctly recorded in images.
● You can check copyright information recorded in images by using
the software, once you save the images to a computer.
Deleting All Copyright Information
You can delete both the author’s name and copyright details at the same
time as follows.
z Follow the steps in “Setting Copyright
Information to Record in Images” (
=
156)
and choose [Delete Copyright Info].
zPress the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
zChoose [Electronic Level], and then press
the [
] button.
zChoose [Reset], and then press the [
]
button.
zChoose [OK], and then press the [
]
button.
Deactivating Touch-Screen Operations
The touch-screen can be disabled to prevent unintended touch
operations.
zChoose [Touch Operation], and then
choose [Off].
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera
responds to a lighter touch.
zChoose [Touch Response], and then
choose [High].