Filter
Top Products
94
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Specic Shutter Speeds and Aperture
Values ([M] Mode)
Still Images
Movies
Follow these steps before shooting to set your preferred shutter speed
and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see “Shutter
Speed” (
=
197) and “Aperture” (
=
197).
1
Enter [ ] mode.
zSet the mode dial to [ ].
2
Congure the setting.
zTurn the [ ] dial to set the shutter speed
(1), and turn the [ ] ring to set the
aperture value (2).
Shutter Speed (Sec.)
Available ISO Speed (
=
75)
250 – 40 [125]
30 – 1.3 [125] – [3200]
1 – 1/2000 [125] – [12800]
● After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specied
shutter speed or aperture value. However, screen brightness
remains the same when the ash is up and the mode is set to [
].
● Images shot at high ISO speeds may look grainy.
(
1
) (
2
)
(
3
)
(
4
)
Specic Aperture Values ([Av] Mode)
Still Images
Movies
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Aperture” (
=
197).
1
Enter [ ] mode.
zSet the mode dial to [ ].
2
Set the aperture value.
zTurn the [ ] ring to set the aperture
value.
● Orange display of shutter speeds when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the aperture value until the shutter speed is
displayed in white, or use safety shift (see below).
● [ ]: Aperture value (size of the opening made by the iris in the lens)
● To avoid exposure problems in [ ] and [ ] modes, you
can have the camera automatically adjust the shutter speed or
aperture value, even when standard exposure cannot otherwise
be obtained. Press the [
] button and set [Safety Shift] on
the [
] tab to [On] (
=
30).
However, safety shift is disabled when the ash res.
● You can customize camera operation so that turning the [
] dial
changes the aperture value (
=
97).