Filter
Top Products
106
Controlling the Camera
Chapter 5 VISCA Camera Operations
When “BRIGHT” is set to “IRIS+G” on menu page 914 for the BRC-H700,
BRC-Z700 or BRC-Z330 camera, “IRIS/dB” is displayed under “IRIS” and you
can manually adjust the iris or gain of the camera by turning the F2 control.
To enable exposure compensation
When EX-COMP (exposure compensation) is set to ON in the menu of the
camera, press the F2 control several times until “EX-COMP” is displayed on the
display panel above the F2 control. The exposure compensation is enabled.
Turn the F2 control to set the exposure compensation level under “EX-COMP.”
To enable backlight compensation
When you shoot a subject with a light source behind it and the subject becomes
dark, use the backlight compensation function.
When you press to light up the BK LIGHT button, the backlight compensation
function of the camera is enabled.
Pressing the BK LIGHT button again to make it go dark disables the backlight
compensation function.
For details on the backlight compensation function, refer to the Operating
Instructions supplied with the camera.
• The BK LIGHT button does not function when the exposure mode of the
camera is set to MANUAL.
Exposure mode
setting on the camera
Indication on the
display panel above
the F2 control
Adjustment procedure
FULL AUTO AUTO Exposure adjusted automatically
using the sensitivity, shutter
speed and iris.
SHUTTER Pri SPEED Adjust the shutter speed
manually by turning the F2
control.
IRIS Pri IRIS Adjust the iris manually by
turning the F2 control.
GAIN Pri GAIN Adjust the gain manually by
turning the F2 control.
MANUAL SPEED, IRIS or GAIN
(selected by pressing
the F2 control)
Adjust the shutter speed, iris or
gain displayed on the display
panel manually by turning the F2
control.
Note
SIG: CAM1 FOCUS EX-COMP CONSTANT CONSTANT
POS: AUTO
0 1/8 15/24
Notes
PGM
BK LIGHT
Lights up