Filter
Top Products
68
Switching the Video with a Cut
Chapter 4 Switching Operation
Example: When you press the PGM select button 1 and NEXT select button
4
Each press of the CUT button switches the program output video.
It is convenient for selecting the video if you use the multi-viewer feature
(page 55) to display multiple input videos on a monitor at the same time. In
the multi-viewer, the program output video is boxed in a red frame, and an
orange x mark appears on the video selected with the NEXT select button.
Each press of the CUT button switches the red frame and the orange x
mark.
Example of 10-picture multi-viewer:
• The red frame and orange x mark are also displayed on the videos for the
picture-in-picture or downstream key function.
For details, see “Executing Picture-in-Picture” (page 76) or “Basic
operation of downstream key composition” (page 85).
• You can change the usage mode of the cross-point buttons (PGM and NEXT
select buttons) to bus fixed mode.
For details, see “Setting the Bus Mode for the Cross-Point Buttons (Menu
Page 943)” on page 56.
Note
Notes
1
PGM
2345678 9101112
12345678 9101112
NEXT
1
PGM
2345678 9101112
12345678 9101112
NEXT
Lights in red
Lights in orange
Lights in orange
Lights in red
Before the CUT button is pressed
After the CUT button was
pressed
IN 1 IN 2
IN 5 IN 6
IN 3 IN 4
IN 7 IN 8
IN 1 IN 2
IN 5 IN 6
IN 3 IN 4
IN 7 IN 8
Program window
Preview window
Preview window
Program window
Video from IN 4 Video from IN 1 Video from IN 1 Video from IN 4