Filter
Top Products
70
Switching the Video with an Effect (Transition Effect)
Chapter 4 Switching Operation
To use the transition lever
Moving the transition lever in the direction of the lit indicator enables execution
of a transition according to the movement of the lever.
When you move the lever as far as it will go in the direction of the lit indicator,
the transition is complete. Then the indicator on the opposite end lights up
instead.
To change the direction of transition
• Using the REV button
Press to light up the REV button to enable transition in the reverse direction.
If you press the REV button while the button is lit, the button goes dark, and the
transition progresses in the normal direction.
• Using the N/R (Normal/Reverse) button
When you press to light up the N/R button, the transition reciprocates each time
the AUTO TRANS button is pressed. If you press the N/R button while the
button is lit, the button goes dark, and this feature is canceled. Each time a
transition is complete, the REV button lights up then goes dark.
When the REV button is pressed
Normal transition
When you press the N/R button
The first transition
The second transition