Sony BRS-200 Camera Accessories User Manual


 
123
Using the REMOTE Connector
Chapter 6 Control Using External Devices
Using the REMOTE Connector
The switcher can be controlled by a computer via the REMOTE connector on
the switcher.
Follow the specifications below to communicate with the computer.
Configuring SERIAL DATA
Communication method
D-sub 9-pin
RS-422A compatible
Synchronous system: Asynchronous
Baud rate: 38400, 19200, 9600 (selectable in the menu)
Character length: 8 bits
Parity: Odd, even, none (selectable in the menu)
Stop bit: 1 bit
1 START BIT + 8 DATA BITs + 1 PARITY BIT + 1 STOP BIT
Odd parity: D0 to D7, and when the total number of ones for PARITY is odd
REMOTE connector
Pin assignments of the REMOTE connector (D-sub 9-pin, female)
START
BIT
PAR IT Y
STOP
BIT
D0
(LSB)
D7
(MSB)
D1 D2 D3 D4 D5 D6
(MARK)
(SPACE)
Pin No. Signal Function
1 GND Frame Ground
2 XMIT – Transmit “A”
3 RCV + Receive “B”
4 GND Receive Common
5 NOT USED Space
6 GND Transmit Common
7 XMIT + Transmit “B”
8 RCV – Receive “A”
REMOTE
12345
6789
1234PGM1 PGM2 AUX1
SDI OUTSDI IN
AUX2 REF IN REF OUT
RS-232C
~
AC IN
RS-422
DVI-I OUT
GENLOCK VISCA
GPI I/O PANEL LAN(10/100) REMOTE
IN1 IN2 OUT