Filter
Top Products
69
Switching the Video with an Effect (Transition Effect)
Chapter 4 Switching Operation
Switching the Video with an Effect (Transition Effect)
Instead of an instantaneous switching of the videos, you can gradually switch
from one video to another while applying various effects. This video switching
is called “transition effect.”
There are two types of transition effects available for the switcher:
• to switch while overlapping the current and next videos (mix)
• to switch while wiping from the current video to the next video (wipe)
Basic operation of a transition effect
The basic procedure for applying a transition effect is as follows:
To execute a transition
There are two methods for executing a transition as follows:
• to execute a transition automatically by pressing the AUTO TRANS button
• to execute a transition manually using the transition lever
To use the AUTO TRANS button
Pressing the AUTO TRANS button gradually switches the video during the
preset transition time.
You can change the transition time. Follow the procedure described in “Setting
the Transition Time” on page 80.
Set the transition effect (mix or wipe).
Select the video to be output next with the NEXT select buttons.
Execute a transition.
Note
N/R
DSK
AUTO
PIP
AUTO
AUTO
TRANS
CUT
REV
MX
WIPE
REV button
N/R button
AUTO TRANS button
Transition lever
Transition indicators