Filter
Top Products
96
Checking the Results of Composite Video (Effect Preview)
Chapter 4 Switching Operation
Checking the Results of Composite Video (Effect
Preview)
You can check and adjust the results of PIP (picture-in-picture) or DSK
(downstream key) composition in the preview window before displaying it as
program output video.
1
Display menu page 933.
For the procedure for displaying the menu, see “Menu Operation” on page
46.
2
Turn the F1 or F2 control to set the output mode in the preview window.
DSK CLN: to set to “Off” when you wish to preview the video as the results
of DSK composition.
PIP CLN: to set to “Off” when you wish to preview the video as the results
of PIP.
If you have changed the setting, “Save setup data? [PAGE] (yes) or [EXIT]
(no)” appears on the display panel.
3
Press the PAGE button.
The setting is saved.
If you do not wish to save the setting, press the EXIT button.
About the preview window and the program output video
After performing the above steps, the results of PIP or DSK composition are
displayed in the preview window. When the PIP or DSK composition has been
executed by using the AUTO TRANS button, CUT button, or transition lever
and the resulting video is displayed in the program window (green illumination
of the PIP AUTO button or DSK AUTO button turns red), the results of PIP or
DSK composition disappear from the preview window.
If the PIP or DSK composite video is erased from the program window (green
illumination of the PIP AUTO button or DSK AUTO button goes dark), the
results of PIP or DSK composition are displayed in the preview window.
OUTPUT DSK CLN PIP CLN 3/6
PVWMODE
On On 933