Filter
Top Products
9
Features
Chapter
Chapter 1 Overview
1
Overview
Features
The Sony Remote Camera Operating Switcher is a compact switcher,
incorporating functions for controlling up to seven BRC-series cameras, and
video switching functions that support HD signals.
Flexible input/output configuration
Optional interface boards can be installed in the switcher, and a combination of
these interface boards allows you to accept various inputs according to your
requirements. An input of DVI signal and eight inputs of SDI signal, up to nine
inputs in total, can be enabled.
The switcher is equipped with four SDI outputs of three channels and one DVI
output as standard. Installing the optional interface board provides one
additional DVI output, allowing you to project different video sources on two
monitors or projectors. This provides wider usage of the switcher for various
events and presentations.
Basic video switching features incorporated
This switcher is of compact type but is equipped with basic HD signal switching
features, such as mix, wipe, PIP (Picture-in-Picture) and DSK (Down Stream
Key). It is also equipped with a dedicated SD signal switching mode that can be
switched by menu operation.
Minimized video latency
Thanks to 1-line minimized video latency of the switcher when a genlock signal
is applied, the switcher is suitable for use for conferences, live events, etc.
Multi-viewer
The switcher incorporates a multi-viewer function that enables display of 4, 10
or 16 different programs on one monitor at the same time with 4-, 10- or
16-picture split screens.