Filter
Top Products
128
Transferring Data between the Switcher and a Computer
Chapter 6 Control Using External Devices
preset camera settings are stored in memory of a BRC-series camera, those in
position numbers 1 to 16 (1 to 6 for the BRC-300/300P camera) are not
reflected to the camera by downloading or uploading camera position data.
• When you are downloading or uploading the setting data, do not change any
of the filenames of the files for storing those data.
• If an interface board installed in the switcher has been changed, the uploaded
data that were set before changing the board are not correctly reflected.
Notes on downloading/uploading frame memory images in SD mode
When transferring image data between the switcher and a computer if the video
signal format is set to “SD” on the switcher, the size of the transferred image
will be somewhat changed.
To make the image identical before and after transferring, adjust the size of the
image using an image editing tool.
For details on video signal formats, see “Setting the Video Signal Format and
Aspect Ratio (Menu Page 951)” on page 50.
When “FORMAT” is set to “SD” and “FRAME” to “59.94”
To upload image data stored on a computer to frame memory of the
switcher
Use an image editing tool to create an image enlarged in horizontal size to 1.125
times then upload it.
To display image data downloaded from frame memory of the switcher on
a computer
An image downloaded to a computer will be larger than the original. Use an
image editing tool to create an image for display that is reduced to 0.889 times.
If black bands of several lines appear in the upper and lower parts of the image,
trim them if necessary.
When “FORMAT” is set to “SD” and “FRAME” to “50”
To upload image data stored on a computer to frame memory of the
switcher
Use an image editing tool to create an image enlarged in horizontal size to 1.125
times and in vertical size to 1.2 times then upload it.
To display image data downloaded from frame memory of the switcher on
a computer
An image downloaded to a computer will be larger than the original. Use an
image editing tool to create an image for display that is reduced to 0.889 times
640
487 487 487
720 720
Creating an image file for
uploading
Horizontal size: 720/640 = 1.125
Uploading
Creating an image file for display
Horizontal size: 640/720 = 0.889
Downloading
Computer BRS-200
Unit: pixels