Filter
Top Products
48
Menu Operation
Chapter 3 Preparations
To change the last two digits
Press the MENU or EXIT button to display the upper-layer menu then specify
the menu page.
Press the MENU or EXIT button then press the . (dot) button, numeric button
for the second digit and first digit in sequence. When the third layer of the menu
is displayed, press the MENU or EXIT button twice then press the . (dot) button,
numeric button for the second digit and first digit in sequence.
To change the last one digit
Press the MENU or EXIT button then press the numeric button for the first digit
for the menu page to be displayed.
To exit menu mode
Press the MENU button again when the TOP menu is displayed.
You can also press the SW mode button or CAM mode button to switch to SW
mode or CAM mode.
Operating the Menu
Use the adjustment controls to change the setting values and to store the setting.
The F1 to F4 adjustment controls can be used for setting the items displayed
above each control. To set the item displayed at the left end of the display panel,
use the F1 control. To adjust the item displayed at the right end, use the F4
control.
To use the adjustment controls (F1 to F4)
Press or turn the controls to operate the menu.
For example, when you turn the F3 control while an item in the F1 control
adjustable area is highlighted, an item in the F3 control area will be highlighted.
You can select the desired setting item in the adjustable area by turning the
corresponding control.
900 t 910 t 911 t 912
...
918
NEAR FAR
EXIT
PA GE
FOCUS BRIGHT ZOOM PAN/TILT
F1 F2 F3 F4
SETUP
TOP
CAMERA
..
SYSTEM
..
INPUT
..
UTILITY
..
OUTPUT
..
STATUS
..
1/1
900
PANEL
..
REBOOT
..
F1 control
adjustable
area
Adjustment controls
F2 control
adjustable
area
F3 control
adjustable
area
F4 control
adjustable
area