Filter
Top Products
55
Basic Setups for the Switcher
Chapter 3 Preparations
To set up multi-viewer output (menu page 934)
The menu is used to set up multi-viewer output.
1
Display menu page 934.
For the procedure for displaying the menu, see “Menu Operation” on page
46.
2
Turn the F1 control to select the type of multi-viewer output under “TYPE.”
You can select from among 1 (full screen), 4-, 10- and 16-picture multi-
viewer.
3
Turn the F2 control to select the picture number for which you wish to set
up the output signal under “WINDOW.”
You can select a number from 1 to 16 according to the type of multi-viewer
selected under “TYPE.”
For details on the type of multi-viewer and the picture number, see “Type
of multi-viewer and picture number” on page 56.
4
Turn the F3 control to select the output video displayed on each divided
window under “SIGNAL.”
PGM: to output program video
PVW: to output preview video
IN 1 to IN 4: to output video input from the SDI IN 1 to 4 connectors at the
rear of the Processor Unit
IN 5 to IN 8: to output video input from the interface board installed in the
IN1 card slot at the rear of the Processor Unit
(When the BRSA-20HSD1 is installed, select any of “IN 5” to “IN 8.”
When the BRSA-20DD1 is installed, select “IN 5.”)
IN 9: to output the video input from the input connector on the interface
board installed in the IN2 card slot at the rear of the Processor Unit
FM 1, FM 2: to output frame memory image 1 or 2 stored in the Processor
Unit
MAT1, MAT2: to output color matte 1 or 2 used for a background image
CLBR: to output color bars used for adjustment and test transmission
AUX1, AUX2: to output the same video as that output from the AUX1 or
AUX2 connector at the rear of the processor unit.
NONE: to display the window in black
• If you select multi-viewer video for the output from the AUX1 or AUX2
output connector (page 64), selecting “AUX1” or “AUX2” in step 4 above
displays the window in black.
• If you select video that cannot be displayed for any reason, such as a different
video format, the corresponding window is displayed in black or in blue (for
FM 1 and FM 2).
OUTPUT TYPE WINDOW SIGNAL 4/6
MV
4 1 PGM 934
Notes