Filter
Top Products
110
Controlling the Camera
Chapter 5 VISCA Camera Operations
2
Turn the F4 (PAN/TILT) control to set the panning/tilting speed.
Assuming the highest panning/tilting speed that the camera supports is 24/
24, you can set the value between 1/24 and 24/24. The larger a numerator
is, the higher the panning/tilting speed becomes.
For the BRC-Z700 camera, you can set the value between 0.5/24 and 24/24.
To face the camera back to the front
Hold the CENTER button in the camera menu/location control section pressed.
The camera returns to face the front.
If you accidentally move the camera with your hand
If the camera is accidentally moved by external force, an object or your finger
is caught with the camera or the camera does not recognize its correct position,
hold the P/T RST button pressed.
The panning/tilting position of the camera is reset to the factory preset setting.
Note
BRS-200
REMOTE CAMERA OPERATING SWITCHER
CAMERA
MENU
LEFT
X
ENTER
Y
DOWN
CENTER
UP
FINE
RIGHT
Z
CAM
CENTER button
DSK
P/T RST