Filter
Top Products
2-25
Cisco ONS 15600 Reference Manual, R7.2
Chapter 2 Card Reference
2.8.9 ASAP Card Port Numbering (1PIO Installed)
2.8.9 ASAP Card Port Numbering (1PIO Installed)
Figure 2-11 shows the installed 1PIO modules and corresponding port numbers for each XFP slot.
Figure 2-11 ASAP 1PIO Port Numbering
2.8.10 SFP Modules
This section describes the SFPs that provide the fiber interface to the ONS 15600 ASAP card when used
with the 4PIO modules. A line rate (OC-3, OC-12, OC-48, or Gigabit Ethernet) must be assigned to each
SFP in the CTC software interface or using TL1. In CTC, SFPs are known as pluggable port modules
(PPMs). To provision PPMs, refer to the Cisco ONS 15600 Procedure Guide.
Note
For information about XFPs, which allow you to provision an OC-192 line rate when used with the 1PIO
module, see the “2.8.11 XFP Description” section on page 2-27.
ASAP CC
STAT
LASER ON
SRV
ASAP
1P IO
ASAP
1P IO
ASAP
1P IO
ASAP
1P IO
Port (PPM Slot) 1-1
Port (PPM Slot) 2-1
Port (PPM Slot) 3-1
Port (PPM Slot) 4-1
1PIO
Module 1
1PIO
Module 2
1PIO
Module 3
1PIO
Module 4
151969
159056