Filter
Top Products
Configuring the Scanner Settings
100
3
E
EE
E
Enter each of the items on the
screen.
❖ File Send Path
Enter the shared folder path for
storing the backup file. Enter
the path in the format of
"\\host name\folder name" or
"\\IP address\folder name".
Note
❒ The specified IP address is ef-
fective only for the computer
running Windows 2000/XP
or Windows NT as operating
system. An IP address cannot
be specified for a host run-
ning Windows 98/Me as op-
erating system.
❖
❖❖
❖ Login User Name
Enter a user name with shared
folder access, in the format of
"work group name\user name"
or "domain name\user name".
❖
❖❖
❖ Login Password
Enter the password for the user
name displayed in the [Login
User Name] box. Each password
character appears as "*".
Note
❒ If you are running Windows
98/Me and a shared folder
password is required, enter
it.
❖
❖❖
❖ [Test]
Click to check whether connec-
tion to the specified shared fold-
er is enabled when data is
entered in the [File Send Path],
[Login User Name], and [Login
Password] boxes.
❖
❖❖
❖ Backup File Name
Enter a file name for the backup
file. Enter a name using up to 20
characters.
F
FF
F
When everything is the way you
want, click [Backup].
Note
❒ Click [Cancel] to restore the
former settings on the screen.
After a backup file is created, the
message “
Backup has succeed-
ed.
” appears.
G
GG
G
Confirm that the backup file is
created in the folder you have
specified, by using the Windows
explorer.
To restore settings from a backup file
A
AA
A
Click [Configuration] on the main
menu.
The password input dialog box ap-
pears.
Note
❒ Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn’t
appear, proceed to
D
.
B
BB
B
You can change the password us-
ing [Configuration] →
→→
→ [Basic Set-
tings] →
→→
→ [Password].
Note
❒ The user name is fixed to “scan-
ner”.
❒ The password is set to “pass-
word” as the factory default.
You can change the password
using [Configuration] [Basic
Settings] [Password].
C
CC
C
Click [OK].
The setup screen appears.
D
DD
D
Click [Basic Settings], and then
[Backup] in the sub-menu area.