Filter
Top Products
Setting Originals
116
4
Placing the Original on the
Exposure Glass
Important
❒ Be careful not to pinch your fingers
when closing the ADF.
❒ To activate the auto detection of an
original, place the original after
this machine starts up.
A
AA
A
Lift the ADF.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
B
BB
B
With the side to be scanned facing
down, place the original on the
exposure glass, and align it with
the home position and scale.
Important
❒ Do not press down on the expo-
sure glass. Strong pressure on
the exposure glass could cause
it to break.
A
When the original width is
297mm (11.7”) or less
B
When the original width is wid-
er than 297mm (11.7”)
When a document is set in this
direction, it is generally neces-
sary to change the document
setting direction at the point of
transmission. ⇒ p.113 “Simplex
Scanning”
C
CC
C
Gently lower the ADF.
ADG015S
ADG016S