Filter
Top Products
Original Orientation
117
4
Placing the Originals in the
ADF
The ADF allows you to place multiple
originals at one time. Originals placed
in the ADF can be scanned on one
side or both sides.
❖
❖❖
❖ Precautions in placing an original in
the ADF
• For information about the origi-
nals that cannot be placed in the
ADF, see p.111 “Originals that
cannot be set in the ADF”.
Important
❒ Attempting to use unsuitable
originals in the ADF can lead
to a misfeed and damage to
the originals. Place such orig-
inals directly on the exposure
glass.
• Do not set originals in the ADF
in excess of the upper limit
mark.
• See p.110 “The Original Sizes
Available for Auto Detection”
for information about the origi-
nal sizes that can be detected
automatically.
• Fan the originals to get air be-
tween the sheets before setting
in the ADF.
A
AA
A
Adjust the side guides to the size
of your originals.
B
BB
B
Place the originals face up (when
performing duplex scans, front
page up), and align them.
For information about original
orientation, see p.113 “Simplex
Scanning” and p.114 “Duplex
Scanning”
Note
❒ If the scan width is the same,
you can set originals whose
length differs from each other.
❒ The originals are scanned in se-
quence, starting with the top
page.
A
When the original width is
297mm (11.7”) or less
B
When the original width is wid-
er than 297mm (11.7”)
Note
❒ When both sides of an original
are scanned, the original setting
direction needs to be changed
regardless of the setting direc-
tion. ⇒ p.114 “Duplex Scan-
ning”
ZEPY010J
ZEPY020J