Filter
Top Products
Connecting to a Power Source
31
2
Connecting to a Power Source
This section explains how to connect
this machine to a power source, using
the bundled AC power cord.
R
WARNING:
R
CAUTION:
A
AA
A
Confirm that the power switch is
set to off.
B
BB
B
Confirm that the lock switch lo-
cated on the left side of the ma-
chine is set to the “Unlock”
position.
Important
❒ Be sure to set the lock switch to
“Unlock”. Turning on the pow-
er with the lock switch set to
“Lock” could result in failure in
scanning or malfunction of this
machine.
C
CC
C
Push the power cord plug all the
way into the power connector on
this machine.
Note
❒ Be sure to use the power cord
that comes with this machine.
D
DD
D
Insert the power plug into the
power outlet.
• Do not use with a power source with a
voltage different from the specified volt-
age. Do not use a power outlet with mul-
tiple devices plugged in. These could
create the risk of fire or electric shock.
• Avoid the use of an extension cord.
• Do not damage, break, twist or modify
the Power Cord. Placing heavy objects
on the cord, pulling on or bending it ex-
cessively can damage the Power Cord,
creating the risk of fire or electric shock.
• Never touch or unplug the power plug
with wet hands. This can create the risk
of electric shock.
• When unplugging from an outlet, be
sure to grasp the plug when pulling.
Never pull on the cord. This could dam-
age the cord creating the risk of fire or
electrical shock.
ZDLH350
ADG024S