Filter
Top Products
Troubleshooting
173
11
Scan settings error messages
Message Possible Cause and Required Action
Cannot detect the scan size.
Check whether the original is
set, then select the proper
size.
[Exit]
The original is not on the exposure glass, or it
is placed but the scan size cannot be automati-
cally detected.
• If the original is not there, place it on the ex-
posure glass.
• Because the scanner detects the scan size
when the ADF is opened and closed, make
sure you open the ADF to an angle of 30 de-
grees or more.
• Small size paper and some paper sizes may
not be detected automatically. For details,
see p.110 “The Original Sizes Available for
Auto Detection” .