Filter
Top Products
Setting Up the Scanner
30
2
Connecting to a Network
This section explains how to connect
this machine to a network.
Important
❒ Use a 100BASE-TX (category 5) or
10BASE-T network cable when
you connect this machine to a net-
work.
A
AA
A
With the network cable you use
for connection, create a single
loop about 15cm (6”)(A
AA
A) away
from an end of the cable, and then
attach the ferrite core that comes
with this machine as illustrated
below.
Note
❒ Skip this step when you use this
machine in North America.
B
BB
B
Insert the network cable’s end
that has the ferrite core into the
network interface connector of
this machine.
Note
❒ When you use this machine in
North America, insert an end of
the network cable into the net-
work interface connector of this
machine.
C
CC
C
Insert the other end of the net-
work cable into an appropriate
connector of a network device,
such as an Ethernet hub.
ADG004S